Aller au contenu principal

Wayfire

Wayfire is a wayland compositor based on wlroots. It aims to create a customizable, extendable and lightweight environment without sacrificing its appearance.

video

Archcraft Wayfire

Get Wayfire From ko-fi And Support Archcraft Development.

Installation

Follow the instructions below to install Wayfire :

  • Download wayfire.tar.gz file from ko-fi, and save it in a directory.
  • Open a terminal in same directory and run the following command to extract the tar file :
$ tar -xzvf wayfire.tar.gz
  • Once the file is extracted, change to the extracted directory which should be wayfire

On Archcraft, You can simply install the provided package in pkg directory with :

$ sudo pacman -U archcraft-wayfire-X.Y-Z-any.pkg.tar.zst
Archcraft Prime

Wayfire comes pre-installed on Archcraft WSE and Archcraft Prime ISOs.

Configuration

Wayfire is pre-configured in Archcraft. In this section, We'll see how the Wayfire wayland compositor is configured, what tools and utilities are used to make it look and work like a complete desktop environment.

Config Structure

The configuration structure of Wayfire in Archcraft looks something like this:

~/.config
├── wayfire.ini : master config file
└── wayfire : shared Files
├── alacritty : alacritty terminal config
├── foot : foot terminal config
├── mako : notification daemon config
│   └── icons : notification icons
├── rofi : rofi config files
├── scripts : various scripts for functionality
├── theme : current theme and pywal themes
├── wallpapers : wallpapers
├── waybar : statusbar config
├── wlogout : wlogout config
│   └── icons : session icons
└── wofi : launcher config

Terminal

Alacritty is the default terminal. In the Wayfire wayland compositor, alacritty is launched with an alternative config file. If you need to change anything, make sure you modify the config files in ~/.config/wayfire/alacritty directory. These are the following config files you can modify to change the behaviour of your alacritty terminal:

~/.config/wayfire/alacritty/alacritty.toml : Main configuration file
~/.config/wayfire/alacritty/colors.toml : Colors configurations
~/.config/wayfire/alacritty/fonts.toml : Fonts configurations

If you need any help with alacritty config, run : man 5 alacritty in terminal.

astuce

By Default, alacritty is used But, If you want to use foot as your default terminal, just edit the ~/.config/wayfire.ini file and comment the keybindings for Terminal : alacritty and uncomment the bindings for Terminal : foot

attention

When you change the theme, the colors.toml file of alacritty and colors.ini file of foot get overwritten by the theme script.

Notification

Mako is used as a notification daemon for notifications in Wayfire. In the Wayfire wayland compositor, mako is launched with an alternative config file, which is ~/.config/wayfire/mako/config. So, If you need to modify anything, make sure you edit this file.

If you need any help with mako config, run : man 5 mako in terminal.

attention

When you change the theme, the colors in config file get overwritten by the theme script.

Wallpaper

swaybg sets the wallpaper in the Wayfire. If you want to change the wallpaper, Edit ~/.config/wayfire/scripts/wallpaper script and add your wallpaper here :

WALLPAPER='/path/to/your/wallpaper'
attention

When you change the theme, the wallpaper path in wallpaper script get overwritten by the theme script.

Statusbar

Waybar is used as the statusbar in Archcraft's Wayfire wayland compositor.

The configurations for waybar can be found inside ~/.config/wayfire/waybar. If you want to modify the waybar settings, or perhaps want to add/remove modules, then you need to edit the following files :

~/.config/wayfire/waybar/config : Main config file
~/.config/wayfire/waybar/modules : Modules config file
~/.config/wayfire/waybar/style.css : CSS file for styling
~/.config/wayfire/waybar/colors.css : CSS colors file

If you need any help with waybar config, run : man waybar

attention

When you change the theme, the colors.css file of waybar get overwritten by the theme script.

Launchers and Applets

Rofi is used for application launchers, command runner and various applets. To modify the rofi config, edit ~/.config/rofi/config.rasi file.

If you need any help with rofi config, run : man rofi in terminal.

The scripts for rofi that are used in Wayfire can be found it ~/.config/wayfire/scripts directory. These are the following scripts that uses rofi to provide the launchers and applets in Wayfire :

rofi_bluetooth : bluetooth applet to quickly connect to BT devices
rofi_launcher : an application launcher, cmd runner, file manager and task manager
rofi_music : music applet, that controls MPD with mpc
rofi_network : network manager applet
rofi_powermenu : power menu, with confirmation dialog
rofi_runner : quickly lets you run a command
rofi_screenshot : screenshot applet that works with grim

If you want to modify any applet or perhaps want to extend the functionality of the applet, just edit these scripts.

The configuration of each script can be found inside ~/.config/wayfire/rofi directory.

Let's say that you want to modify the looks of launcher, then you need to edit the ~/.config/wayfire/rofi/launcher.rasi file. Same goes for every other applet, Edit the respective file in the same directory.

If you need any help with rofi theming, run : man rofi-theme in terminal.

To change the colors and fonts of the launchers and applets, Edit the ~/.config/wayfire/rofi/shared/colors.rasi and ~/.config/wayfire/rofi/shared/fonts.rasi files.

astuce

By default, rofi is used as app launcher. But, If you want to use wofi instead of rofi, Edit the config file ~/.config/wayfire.ini and uncomment wofi keybindings (and, comment the rofi bindings).

attention

When you change the theme, the shared/colors.rasi file of rofi and style.css file of wofi and wlogout gets overwritten by the theme script.

wayland compositor

The main configuration file of Wayfire is ~/.config/wayfire.ini. Edit this file for everything, from plugins to keybindings, etc. The changes are automatically loaded in-place.

If you need any help with wayfire configuration, visit : Wayfire Configuration

attention

When you change the theme, colors in wayfire.ini file gets overwritten by the theme script.

Keybindings

Here's a list of some important keybinds you need to know for operating Wayfire easily. If you want to view, modify or add new keybinds, Edit ~/.config/wayfire.ini file.

Applications

KeysAction
super + ReturnOpen terminal
super + shift + ReturnOpen fullscreen terminal
super + FOpen file manager (thunar)
super + EOpen text editor (geany)
super + WOpen web browser (firefox)
KeysAction
super + DOpen application launcher
super + ROpen command runner
super + NOpen network manager applet
super + MOpen music applet
super + XOpen powermenu applet
super + SOpen screenshots applet
super + BOpen bluetooth applet

Hardware Keys

KeysAction
PrintTake screenshot
alt + PrintTake screenshot in 5 seconds delay
shift + PrintTake screenshot in 10 seconds delay
super + PrintTake screenshot of selected area
XF86AudioRaiseVolumeIncrease volume
XF86AudioLowerVolumeDecrease volume
XF86AudioMuteToggle mute speakers
XF86AudioMicMuteToggle mute microphone
XF86MonBrightnessUpIncrease display brightness
XF86MonBrightnessDownDecrease display brightness

Workspaces

KeysAction
superExpo : Show overview of all workspace
super + 1..9Switch to respective workspace
super + shift + 1..9Switch to respective workspace with focused window
super + ctrl + 1..9Move focused window to respective workspace
super + ctrl + Left/Right/Up/DownSwitch to Left/Right/Top/Bottom workspace respectively
super + ctrl + shift + Left/Right/Up/DownSwitches to workspace Left/Right/Top/Bottom with the focused window
super + ctrl + alt + Left/Right/Up/DownSend the focused window to the workspace Left/Right/Top/Bottom
super + ctrl + LSwitches to last active workspace
super + alt + 1/2/3Switch to workspace set 1/2/3
super + shift + alt + 1/2/3Send the currently focused window to workspace set 1/2/3
ctrl + alt + Left/RightLeft/Right workspace (cube)
super + OSwitch to next output
super + shift + OSwitch to next output with focued window

Window Management

KeysAction
super + C/QKill active window
super + VShow all windows on current workspace
super + shift + VShow all windows from all workspaces
alt + TabTask switcher
super + TabQuick task switcher
super + LeftTile window to the left edge
super + RightTile window to the right edge
super + UpMaximize window
super + DownRestore window's initial state
super + HTile window to the top-left edge
super + JTile window to the bottom-left edge
super + KTile window to the top-right edge
super + LTile window to the bottom-right edge
super + CommaTile window to the bottom edge
super + DotTile window to the top edge

Wayland Compositor

KeysAction
super + IInvert output colors
super + ZToggle idle
super + TToggle tile mode
super + ctrl + FToggle fisheye effect
super + SpaceToggle fullscreen
super + shift + TToggle Always on top
super + shift + SToggle sticky mode
super + shift + MToggle Maximize
super + shift + DToggle Show desktop
super + shift + BToggle Send to back
super + alt + BToggle Blur

Misc Keys

KeysAction
ctrl + alt + LTrigger lockscreen
super + PRun colorpicker

Mouse Bindings

ButtonAction
super + leftMove/Drag Window
super + rightResize Window
super + scrollZoom the Desktop
super + alt + scrollAdjust Opacity
super + ctrl + rightRotate Window (2D)
super + shift + rightRotate Window (3D)
ctrl + alt + leftActivate Cube

Nvidia

If you're on Archcraft and install the provided package, There's nothing else you need to do in order to run it on Nvidia machine. When you install Archcraft on a machine that has Nvidia, It does all the operations (mentioned below) required to run a wayland compositor on such machines. The compositor should work fine.

If you're running any other distribution and want to install this setup on your Nvidia machine, You need to do some tweaking. In this guide, I'm assuing you're using Arch Linux. Follow the steps below to make this wayland compositor work on Nvidia :

  • Install Nvidia Drivers on your system. NVIDIA
  • Edit /etc/mkinitcpio.conf file and add nvidia kernel modules
MODULES="nvidia nvidia_modeset nvidia_uvm nvidia_drm"
  • In the same file, Remove kms hook from hooks array if present.
  • Rebuild your initrd file with : sudo mkinitcpio -P linux
  • Edit /etc/default/grub file and add nvidia_drm.modeset=1 kernel parameter for Nvidia
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nvidia_drm.modeset=1 ..."
  • Update your grub config file with : sudo grub-mkconfig -o /boot/grub/grub.cfg
  • Reboot your Nvidia Machine and login to your wayland compositor, It should work now.

More Information: NVIDIA#Installation, NVIDIA#DRM_kernel_mode_setting

Screenshots

Desktop

Here's few screenshots of Wayfire desktop. These'll give you an idea of the experience of Wayfire in Archcraft.

Desktop 1Desktop 2Desktop 3Desktop 4
imgimgimgimg
Desktop 5Desktop 6Desktop 7Desktop 8
imgimgimgimg
Desktop 9Desktop 10Desktop 11Desktop 12
imgimgimgimg
Desktop 13Desktop 14Desktop 15Desktop 16
imgimgimgimg
Desktop 17Desktop 18
imgimg

Checkout all the videos here : Wayfire Playlist

Themes

To Change the theme, Click on Color Palette icon on waybar. To apply a random theme, Left Click on the theme module and To restore the default theme, Right Click on the theme module.

There's only one theme available for Wayfire.

img

FAQs

How to update my config to new configs?

Download the updated package from ko-fi (for free) and just install it to update to new configs.

Steps to get updates (or re-download files):

  • Login to you Ko-fi account
  • Go to your Ko-fi Payments History
  • Select the purchases you've made
  • Click on View Details
  • Then, Click on View Content to download the updated files.
Why my cursor is not visible?

When using certain graphics drivers (e.g. the VMSVGA graphics controller or the proprietary NVIDIA driver), the cursor is invisible. This can be fixed by using software cursors :

$ export WLR_NO_HARDWARE_CURSORS=1
How to change GTK theme, icons and cursor?

To change GTK theme, icons and cursor in Wayfire session, Edit ~/.config/wayfire/scripts/gtkthemes script and restart Wayfire to apply the changes.

THEME='Manhattan'
ICONS='Luv-Folders-Dark'
FONT='Noto Sans 9'
CURSOR='Qogirr-Dark'
How to manage multiple monitors and resolution in Wayfire?

If you use multiple monitors with Wayfire wayland compositor, you can manage them as follow:

  1. You can get the names of your outputs with wlr-randr
  2. Edit ~/.config/wayfire.ini file and modify the output configuration section as follow :
# External monitor, mode: 1920x1080, position: right of laptop, scale: 1.5
[output:HDMI-A-1]
mode = 1920x1080@60000
position = 1920,0
transform = 90
scale = 1.500000
Why Alacritty is not working on my computer?

Since Alacritty is a OpenGL based terminal emulator, It may not work on some computer hardwares. You can make it work on such computers by following these methods :

  1. Open alacritty with LIBGL_ALWAYS_SOFTWARE=1 variable. Edit the keybindings/script launching alacritty and replace alacritty with LIBGL_ALWAYS_SOFTWARE=1 alacritty
  2. Edit /usr/share/applications/Alacritty.desktop desktop file and replace Exec=alacritty with Exec=env LIBGL_ALWAYS_SOFTWARE=1 alacritty